How To Fix iPhone sound not working on iPhone iOS 13
How to fix the iPhone's sound not working: There are generally two main sources of iPhone sound problems: The first problem can be caused by software problems, and the second one by hardware.
However, audio problems on mobile devices are often associated with hardware damage, but this is not necessarily the case because the root source of the problem must first be determined.
There are also cases where software-related factors are responsible for muting the sound. This can happen with any iPhone model and any brand of smartphone. Overcoming iPhone Based on this history, there is no evidence of hardware component damage on the phone.
So solving the problem is relatively easier without making any substitutions. For more information, you can see some of our explanations.
Other: Causes of Hot iPhone And How To Fix it
How to fix iPhone Sound not Working after iOS update
Troubleshooting sound not coming out on the iPhone can be started with a simple game. Try to remove all accessories connected to your iPhone, such as protective cases, etc., which could block the speakers or affect the audio output.
After removing all accessories, open a sound-enabled app to make sure your iPhone's sound is restored to normal.
But if you still don't hear any sound, don't forget to remove all software-related causes as well.
You can control your phone's audio function by ringing your device or launching an app that supports audio output from the speaker.
Other : How to fix an iPhone 11 Pro that won’t pair or connect to a Bluetooth
1. Adjust the volume
2. Restart iPhone (soft reset).
Don't forget to restart your iPhone after updating iOS for easy system setup and recovery from possible misplaced minor errors.
Restarting the iPhone is one of the simplest and most powerful methods to fix random system errors.
Hopefully, you won't forget to perform the soft reset task after installing an application or software update as a confirmation that the device has made new changes to the system. There are several slightly different ways between iPhone types. Here are the explanations.
How to perform a small reset on an iPhone to fix minor bugs that don't generate sound?
A soft reset is performed on some iPhone 8 Plus or earlier devices that have a physical home button. A soft reset is performed according to the following steps:
- First, press and hold the Side (Power) button for a few seconds until Swipe to Power Off appears.
- Then drag the slider to the right to completely turn off the device.
- After the phone has been turned off for about 30-40 seconds, turn it back on "by pressing and holding the Side (Power) button" until the Apple logo appears.
- Let the device finish rebooting. Once the iPhone is ready for use, check if that fixes the sound not working problem on your iPhone.
On iPhone x and later models, a soft reset is performed as follows:
- Press and hold the Side / Up button and one of the volume buttons on your iPhone.
- Then release both buttons when the Slide to Power Off slider appears.
- Drag the slider to the right to completely turn off the device.
- Then wait a few seconds until the phone turns off.
- Then press and hold the Side / Up button again until the Apple logo appears. Then release the keys and let the phone complete the boot sequence.
3. Disable Bluetooth on iPhone.
When you hear no sound from your iPhone, the iPhone connection may be paired with a Bluetooth audio device.
Your iPhone's audio output will automatically be routed to the connected device via the Bluetooth wireless connection. You can start by checking and turning off your iPhone's Bluetooth settings by following the steps below. From the home screen, tap Settings > Select Bluetooth, then turn the Bluetooth switch on or off to disable the feature.
While users of iPhone iOs 13 can manage via the control center, simply open the control center from any screen, press and hold the Bluetooth icon, and turn off the connection function.
4. Adjust the iPhone volume level
The next reason you can't hear any sound from your iPhone is that it's causing the audio settings to be set to the lowest level. Or, if it's not the quietest but makes no sound, it could be because the automatic update is overwriting itself, lowering the system volume of the phone.
To resolve this, follow the steps to manage your iPhone's volume settings. In addition to using the physical button located on the side of the iPhone, you can also log in to make some audio changes via the control center. If you're using an iPhone X or later, open the controls by swiping from the bottom to the top corner of the screen. While in the previous model, the control center is accessed by swiping from the top to the bottom edge of the screen.
If you have entered the control center, tap and drag the volume icon to the desired level. In iOS13, the updated volume HUD functionality has been added. This is a new expandable volume interface with a small bar next to the iPhone screen that will appear when you first press the volume up or down button.
Double-check if the sound on your iPhone has been successfully corrected to silent after the iOS update.
Other : iPhone 11 that cannot receive SMS after iOS update, How to Fix
5. Turn off Do Not Disturb (DND).
When the function is activated, everything becomes silent. The DND, or Do Not Disturb, feature turns off all sounds on your iPhone except the alarm sound. You can confirm the impact of a new iOS update that doesn't enable this feature, check your settings, and make any necessary changes. Look at these steps:
Open the Control Center on your iPhone.
Then look for the DND icon (above) and tap on it to disable the feature if needed.
iPhone owners can also disable Do Not Disturb mode permanently via the iPhone settings. Just look at these steps:
- Start from the home screen, then tap Settings.
- Then select Do Not Disturb. Then tap the switch next to Do Not Disturb to turn the feature off.
- The audio function on your iPhone is now enabled.
Check the audio function again if this also fixes the iPhone no sound issues.
6. Reset all settings iPhone.
If all the above methods have been tried but they don't work to fix iPhone sounds not working, there is no other method but to go back to basic settings.
This is usually due to a conflicting update process, which causes the iPhone's audio function to malfunction and produce sound as expected.
So, to solve this problem, it would be helpful to reset all settings on the iPhone to their default values. But this process will delete all current settings and custom options and then restore the original values. It doesn't affect the information stored on the iPhone's internal memory, so you don't need to back up any files.
From the home screen, tap Settings > Select General > Then scroll down and tap Reset.
Select the option to reset all settings. Then enter your device password when prompted to continue.
Then confirm that you want to reset all iPhone settings. Once the reset is complete, you need to reactivate the required features one by one until you can use that iPhone again.
7. Erase your iPhone data and restore factory settings.
This step is the last resort that can be done to fix the iPhone not making any sound after the iOS update. I don't expect you to do this technique yourself without the help of an expert.
A factory reset is the most powerful technique when it comes to repairing the system and software on your iPhone. And keep in mind that a factory reset may erase all data on your phone, including that in your iPhone's internal storage.
We recommend that you backup all data to iCloud or iTunes before restoring your iPhone. Follow the steps.
Other: How to Fix iPhone 6S Plus Sound and Vibration Not Working
Reset the iPhone to factory settings.
Tap Settings on the Home Screen > Select "General" > "Tap Reset."
Tap the option to remove all content and settings. If prompted, enter your iPhone device passcode to continue.
Confirm that you want to reset the iPhone and perform a factory reset.
Apart from that, you can also use iTunes to manually wipe the device and restore it to factory defaults using a computer.
If you choose this method, you can backup iPhone data directly to a computer hard drive via iTunes.
Just follow these steps:
Open iTunes on your computer first, then connect your iPhone to your computer using the supplied USB or Lightning cable. Then wait for iTunes to recognize the connected device. After connecting successfully, you will see your iPhone icon in iTunes.
Click to select the iPhone type when it appears in iTunes.
Then go to the Summary section.
Click the Restore [iPhone] button. If prompted, click the Reset button again to confirm. Then iTunes will start wiping the iPhone device and try to download the latest firmware available.
Follow the rest of the instructions on the computer screen to finish restoring the iPhone in iTunes.
After restoring the iPhone to factory settings, you need to set up the iPhone as new to be able to use it again.
These are some ways to deal with iPhone sound not working properly after an iOS update. When all is done but the speaker continues to have problems, you can take it to an Apple technician for a more thorough hardware check.